ENDURO 6902 (61902) Hub Bearing - 15mm x 28mm x 7mm

ENDURO 6902 (61902) Hub Bearing - 15mm x 28mm x 7mm

Category: Hub Bearing

Specifications
Model
6902, 61902, S6902, CH6902, CO6902, CXD6902
Details

The Enduro line of bearings are available in high-carbon chromium steel, 440C stainless steel, ceramic-hybrid and XD-15 with ceramic or stainless balls. Enduro's bearings are always engineered with deepest groove races possible to accommodate the largest balls and feature dual-lip seals that ride in a micro-groove creating a full labyrinth to provide superior protection against the elements.

WHICH BEARING TO CHOOSE?

 

6902 - Abec-3

  • Deep groove design races
  • Grade 10 balls (high carbon chromium steel)
  • Fill with high pressure water proof grease
  • Static load: 558lbf/ 2.48kN
  • Weight: 15.7g


61902 - Abec-5

  • Deep groove design races
  • Grade 10 balls (high carbon chromium steel)
  • Fill with high pressure water proof grease
  • tighter tolerances and higher quality output than ABEC-3
  • Static load: 558lbf/ 2.48kN
  • Weight: 27.4g

 

S6902 - Stainless Steel 440C

  • Deep groove design stainless steel alloy races
  • Grade 10 balls (stainless steel)
  • Fill with Mobil XHP 222 high pressure water proof grease
  • Long life and superior corrosion resistance
  • Excellent use in wet conditions
  • Two years anti-corrosion warranty
  • Static load: 446lbf/ 1.98kN
  • Weight: 15.7g

 

CH6902 - Ceramic Hybrid

  • Deep groove design 52100 High-Carbon chromium alloy races
  • Grade 5 balls (Silicon-Nitride Ceramic) increase bearing life
  • Fill with high Mobilux NGLI 2 pressure water proof synthetic grease
  • Static load: 558lbf/ 2.48kN
  • Weight: 13.87g
 

CO6902 - Ceramic Zero

  • Deep groove design black-oxide treated 52100 high-Carbon Chromium alloy races (extra level of corrosion resistance)
  • Grade 5 balls (Silicon-Nitride Ceramic) increase bearing life
  • Fill with high pressure water proof grease
  • Static load: 558lbf/ 2.483kN
  • Weight: 13.87g

 

CXD6902 - XD-15 the ultimate upgrade

The most impressive feature of XD-15 ceramic-hybrid bearings is, unlike other bearings, they only get better with time and use. As the bearings wear-in, the super-hard ceramic balls actually make the XD-15 races even smoother. So, when compared to other ceramic-hybrid bearings on the market that claim speed and power advantages on day one, Enduro XD-15 bearings not only provide the same initial advantages on day one, but will become faster and smoother with time and use, while the other ceramic-hybrid options will only get slower. Enduro is so confident in the performance of their XD-15 Ceramic-Hybrid bearings that they carry a limited lifetime warranty against wear and corrosion.
 

  • Deep groove design corrosion-proof, cryogenically treated nitrogen steel races
  • Grade 5 balls (Silicon-Nitride Ceramic) increase bearing life
  • Fill with Kluber NBU52 grease that runs smoother with time and highly resistant to being washed out
  • Static load: 558lbf/ 2.48kN
  • Weight: 13.87g

 


View more about ENDURO 6902 (61902) Hub Bearing - 15mm x 28mm x 7mm on main site